URL Networks

Configure the TP-Link VG5612 in Bridge Mode for NBN

You are here: Help Routers Configure the TP-Link VG5612 in Bridge Mode for NBN


If using a PPPoE router such as a Mikrotik you will need to put the TP-Link VG5612 in Bridge Mode.  To do this please follow the steps below:

  1. Connect to LAN 1
  2. Browse to 192.168.1.1
  3. Enter admin for the username and password
  4. Click the Quick Setup link
  5. Click Next
  6. Click Next
  7. Select No. I want to configure The Internet Connection myself. Then click Next
  8. Set the following
    1. Set ISP to Other
    2. L2 Interface Type to VDSL
    3. Enable VLAN ID – unchecked
    4. Connection Type to Bridge
    5. Click Next
  9. Click Next leaving Enable 3G/4G unchecked
  10. Select Disabled and Click Next
  11. Click Next
  12. Click Save to apply the changes
  13. If successful you should see success, click Finish.  You should now connect your PPPoE router to Lan 1, Lan 2 or Lan 3