Cisco Call Manager Router (CME)
Cisco Call Manager Router (CME)
The example configuration below is used to configure Cisco Call Manager gateways with our service.
The example requires you to push 9 before dialing any phone number. E.g. to Call URL Networks you would dial 90390085900 and the leading 9 is removed with the Discard9 translation profile.
Cisco Example Configuration
- In the configuration your will see items that say REPLACE_WITH, you need to replace this item with your details which can be found via your dashboard login or in your Account Notification
voice service voip
allow-connections sip to sip
sip
!
!
voice translation-rule 1
rule 1 /(^9)/ //
!
!
voice translation-profile Discard9
translate called 1
!
!
dial-peer voice 500 voip
translation-profile outgoing Discard9
destination-pattern 9T
session protocol sipv2
session target dns:REPLACE_WITH_YOUR_DOMAIN
session transport udp
dtmf-relay sip-notify rtp-nte
codec g711ulaw
no vad
!
dial-peer voice 300 pots
trunkgroup lo
destination-pattern REPLACE_WITH_YOUR_DID
!
sip-ua
credentials username REPLACE_WITH_YOUR_USERNAME password REPLACE_WITH_YOUR_PASSWORD realm voip.url.net.au
authentication username REPLACE_WITH_YOUR_USERNAME password REPLACE_WITH_YOUR_PASSWORD
realm REPLACE_WITH_YOUR_DOMAIN
nat symmetric role passive
nat symmetric check-media-src
srv version 1
registrar dns:REPLACE_WITH_YOUR_DOMAIN expires 180
!
