Scroll Top
Level 17/31 Queen St, Melbourne. VIC. 3000

Yealink W52 – Firmware Upgrade

Yealink W52 – Firmware Upgrade

Base Firmware

  • Download the base firmware and extract the zip file –
  • Browse to the IP Address of the phone (to find the Base?s IP Address tap the button on the top of the base and on the Handset screen you will receive a paging with the IP address).
  • Login to the control panel, the default username and password is admin
  • On the status page check if the Firmware Version is older than, if so complete the next step
  • Click Phone, then Upgrade.
  • Click the Browse link where it says “Select and Upgrade Base Firmware” and locate the file and click Upgrade
  • Once Rebooted, login and the Firmware version should now be:
  • On the Status Page if your Hardware Version is later than then you can upgrade using the Over the Air Method, if your version us less than you will need to use the USB Method, see below

Handset – Over the Air

Handset – USB method

  • Connect the Mini USB top your computer to the Mini USB port on the Handset, if you have already connected the cable you may need to disconnect and reconnect to find the device
  • Click the “Scan Device” button to scan for the handset
  • Select Browse and locate the file
  • Click Upgrade to update the handset
  • To check if the new firmware has been loaded on the handset do the following:
    • Push the OK key
    • Select information
    • Select System Status
    • Select More…
    • Select Handset
    • The Handset Firmware should be upgraded

Related Posts